| |
- The RM450
has a milling depth of 150mm and is designed for milling in larger areas
and depths that large contractors require.
-
The tilt cylinder adds another dimension to the Schibeci RM450. This system
allows you to cut to depths on either side of the machine (the same as
the smaller RM milling machines) or set a cross slope angle upto 15% for
rebates and angle cuts as required.
-
The side shift allows for asphalt removal against kerbs and structures.
This RM450 is ideal for high speed edge planing and shallow cuts.
- The RM450
is designed primarily for the Roadworks and Construction industry.
- It's compact design makes it perfect for minor rectification works.
- It's solid framework and fluid dynamic design makes the RM range stable
in the cut.
- The two levelling rams on the RM give the operator a high degree of
accuracy in cutting depth and cross slope control.
- All controllers for the RM are easily mounted onto any standard High
Flow Skid Steer and utilise the machines existing hydraulics.
- Dust suppression system comes standard with the RM range.
- The RM range is an excellent solution for Councils, Contractors, Maintenance
Teams and Hire Companies.
| Performance
Guidelines |
| •
Cuts Asphalt up to 150mm (6 inches) deep (per pass) |
| •
Excellent milling solution for asphalting contractors and councils |
| •
For use in minor road rectification works |
| •
Suits High flow skid steers and excavators |
|
|
|
|
| |
Tungsten
Carbide Cutting Teeth/Picks used |
|
